AT-SYS-8-COMBO

$7,499.95$9,799.95
  • AT-SYS-8-COMBO
  • AT-SYS-8-COMBO
  • AT-SYS-8-COMBO
  • AT-SYS-8-COMBO
  • Airwave Technologies wireless microphone system handheld headset church school theater vocal sing sure audio technica
  • AT-SYS-8-COMBO
  • AT-SYS-8-COMBO

AT-SYS-8-COMBO

$7,499.95$9,799.95

FREE SHIPPING!

Turnkey 8 Channel Wireless System Package with 4 Handhelds, 4 Single Ear Wireless Headsets and 4 Lavaliers with Body Packs

This multi-channel wireless microphone package is an ideal 8 channel system for a facility or audio engineer that needs to provide the ultimate audio solution for their venue.  The entire multi-channel wireless microphone system is housed in a 10 space rolling flight case that securely protects each component of the system. Easy to transport, this setup with 3 different transmitter options for each of the 8 channels is the perfect portable or stationary solution for wireless microphones. The multi-channel wireless microphone system is also available in multiple configurations.

4 Airwave Technologies AT-4200 Dual Channel Wireless Systems

4 HSD-SLIMLINE+SE Single Ear Wireless Microphone Headsets

4 AT-4000 Series U41 Wireless Handheld Microphones

AT-LAV2 Lavalier Microphones

4 AT-4000 Series U42 Wireless Body Packs

Furman M-8Lx Power Conditioner with Lights

RF Venue Distro 4 Premium Antenna Distribution Hub

Diversity Fin

2 Band-Pass Filter 470-560 Mhz

2 25ft Antenna Cables

4 Wireless Microphone Clips

10 Space Flight Rack with Casters

2 Two Space Rack Drawers with Diced Foam

514-542 MHz

FCC Tested and Approved: FCC ID  2AINTAT-4200

*Microphone stand for RF Venue DFIN not included

 

AT-4200 WIRELESS MICROPHONE RECEIVER SPECIFICATIONS

Frequency Range: 470~489MHz / 514~542 MHZ
Modulation : FM
Working Range: 328’
Optional Frequency: 192
Frequency Response: 50Hz ~ 15KHz (±3dB)
Dynamic Range: > 105dB
THD: < 0.5%
S/N Ratio: > 102dB(A)
RF Sensitivity: < -95dBm
Image Rejection: > 60dB
Output Connectors: XLR×1/ 1/4-inch connector×1
Audio Output Level: XLR: +10dBV / 1/4-inch connector: +8dBV
Impedance: XLR: 3KΩ / 1/4-inch connector: 3KΩ
Pilot Tone: 32.768KHz
Display: LCD
Power Requirements:  12V/0.5A DC
Operating Temperature Range: 32°F - 122°F
Dimensions: 6.299” (W) x 16.142” (L) x 1.732” (H)
Weight: 3.858 lb.
FCC ID: 2AINTAT-4200

AT-U41 HANDHELD MICROPHONE TRANSMITTER SPECIFICATIONS

Capsule Sensitivity: -50dB ± 2dB V/PA@1KHz
Capsule Frequency Response: 50Hz ~ 16KHz
Gain Adjustment Range: 0/3/6dB
Input Impedance: 5KΩ
Output Power: 2mW / 10mW / 30mW
Spurious: >dB
Pilot Tone: 32.768KHz
Display: LCD
Power Requirements: 1.5V x 2(AA)
Battery Life: >8H/1300mAH
Dimensions: 9.84” x 1.97”
Weight: 12.7oz

AT-U42 BODYPACK TRANSMITTER SPECIFICATIONS

Gain Adjustment Range: 0/3/6dB
Input Impedance: 5KΩ

Output Power: 2mW / 10mW / 30mW
Harmonic Rejection: > 50dB
Pilot Tone: 32.768KHz
Display: LCD
Power Requirements: 1.5V x 2(AA)
Battery Life: >8H/1300mAH
Dimensions: 6.5” x 2.56” x .91”

Weight: 4.59oz

 

4200 Series Manual Link 

If using up to 2 units (up to 4 channels) the multi-channel wireless microphone system does not require an antenna combiner under normal conditions.  If using 3 to 5 units (6 to 10 channels) the use of an approved antenna combiner is highly recommended. The official Antenna distribution partner of Airwave Technologies is RF Venue.   They are without question, the leaders of antenna distribution.